5 — Operating Instructions
49
Operator Manual
Vision® 1300 Series
920515770_J
1. Vision CW Container Rack Shown
2. Rack Shown Empty for Clarity
3. Manifolded Rack Guiding Rail
4. Guiding Rail
.
• If processing Surgical Case Cart(s):
a. Ensure doors of surgical case cart are locked in open position.
b. Position open side of carts facing opposite control panel to help ensure proper draining and drying
when floor tilting system is used.
c. Push cart inside wash chamber, taking note of cart height using cart height template on door frame to
decide which CART cycle to process.
Cart Height Template Shown
.
d. Roll cart into wash chamber inserting proper wheels between the two guiding rails (go to Step Step 7).
To Next Page
Loading...
