Suzuki Wagon R Plus RB310 - Page 385

6A2-46 ENGINE MECHANICAL (M13 ENGINE)
3) Install timing chain by aligning dark blue plate (1) of timing
chain and triangle mark (2) on camshaft timing sprocket as
shown in figure.
4) Fit crankshaft timing sprocket to timing chain by aligning gold
plate (3) of timing chain and circle mark (4) on crankshaft
timing sprocket. Then install crankshaft timing sprocket fitted
with chain to crankshaft.
5) Apply engine oil to sliding surface of timing chain No.1 guide
(1) and install it as shown in figure.
Tighten guide bolts to specified torque.
Tightening torque
Timing chain guide bolt
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
6) Apply engine oil to sliding surface of chain tensioner (1) and
install chain tensioner and spacer.
Tighten tensioner bolt to specified torque
Tightening torque
Timing chain tensioner bolt
(a): 25 N·m (2.5 kg-m, 18.0 lb-ft)
[A]: View A
“a”:Approx. 60°
“b”:Approx. 30°
1
1
2
2
3
4
A
[A]
“a”
“b”