TRANSFER 7D-5
12) Remove transfer rear mounting bracket (2) with transfer rear
mounting (1) from transfer assembly.
MOUNTING
Reverse dismounting procedure for installation noting the follow-
ing.
1) Tighten transfer mounting bolts (3) to specified torque.
Tightening torque
Transfer mounting bolt (a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
2) Tighten transfer rear mounting bracket No.2 bolts (1) and
transfer rear mounting bracket nuts (2) to specified torque.
Tightening torque
Transfer rear mounting bracket No.2 bolt
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
Transfer rear mounting bracket nut
(b): 55 N·m (5.5 kg-m, 40.0 lb-ft)
3) Tighten transfer rear mounting bracket bolts (1) to specified
torque.
Tightening torque
Transfer rear mounting bracket bolt
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
1
2
1. Transaxle
2. Transfer assembly
2, (b)
1, (a)
1, (a)
To Next Page
Loading...
