27
Smart Rotary Cell Changer
404 Evolution 200 Series User Guide Thermo Scientific
16. Continue as above until all entries in the sample list have been measured.
Related Topics
Initializing the Cell Changer
Cell Changer Settings
Measuring Standards with a Cell Changer
Displaying the Cell Changer Status Monitor
Operation
Measuring Standards with a Cell Changer
The cell changer can be used to measure blanks, reference samples, standards and samples for
quantitative analysis. The measurement sequence depends on the quantitative analysis type
and other measurement settings. During the measurement, the loading guide will indicate
when and how to load the cell changer. Follow the instructions that appear.
Related Topics
Initializing the Cell Changer
Cell Changer Settings
Measuring Samples with a Cell Changer
Displaying the Cell Changer Status Monitor
Displaying the Cell Changer Status Monitor
When a supported cell changer is installed, the selected application can be configured to
display a cell changer status monitor above the data display.
Y To display a status monitor for an installed cell changer
1. Click Configure above the data display for the selected application. See “Instrument
Status Monitors” for more information.
A dialog box appears.
2. Select Cell changer status and click OK.
Note The cell changer option appears in the dialog box only when a supported cell
changer accessory is installed.
To Next Page
Loading...
