2
INSIGHT Software
Operation
44 Evolution 200 Series User Guide Thermo Scientific
Related Topics
Setting Application Parameters
Fixed
Accessories Tab for Fixed
Samples Tab for Fixed
Accessories Tab for Fixed
The status of accessories can be monitored during measurements.
Related Topics
Accessories
Setting Application Parameters
Fixed
Instrument Status Monitors
Instrument Tab for Fixed
Samples Tab for Fixed
Table of wavelengths Wavelengths at which measurements will be made, plus the
corresponding control limits if specified (see above). The number
of required wavelengths depends on the setting of Result mode (see
above). To enter or change the value in a table cell, click it and
type. To order the list by wavelength, lower control limit or upper
control limit, click the appropriate column heading.
Autoscale Autoscale automatically adjusts the Y-axis scale for optimal viewing
of data during a measurement.
Ordinate Y scale To specify the Y-axis display limits, deselect Autoscale and set Max
and Min to the desired maximum and minimum Y values,
respectively, in the range 400 to -400.
Description (optional) Description of the template.
Click Settings in Fixed to display the Accessories tab in
the right pane. The available parameters depend on the
installed accessories. See Accessories for details.
Feature Description
To Next Page
Loading...
