Xerox Phaser 8860 - Page 141

09/2007
4-17
Phaser 8860/8860MFP Service Manual
REP 2.0.2
Repairs and Adjustments
Initial Issue
Figure 1 Releasing the Printhead Wiper Lock
8. Lower the Printhead Wiper Assembly completely by rotating the Wiper drive gears as
shown in Figure 2.
Figure 2 Lowering the Printhead Wiper Assembly
9. Move the Printhead Tilt Spring from its position on the Printhead and hook it behind itself
as shown in Figure 3.