April 2017
8-4
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue
Product Technical Overview
For more information refer to Media Supply. Refer to Figure 2 for paper supply options.
Figure 2 Paper supply options
Product Codes and Configurations
Refer to Table 1.
High Capacity Feeder
The high capacity feeder (HCF) is a dedicated paper tray with a capacity of approximately
2000 sheets of 60 to 215gsm (16lb bond to 80lb cover) paper. It can handle paper sizes of A4
LEF, 7.25x10.5 inch LEF, or 8.5x11 inch LEF. Refer to Figure 3.
Figure 3 High capacity feeder
Finishers
The finishers serve as optional output devices for the machine. Two types of finisher are available:
• Integrated Office Finisher - The Integrated office finisher has a capacity of approxi-
mately 500 sheets of Letter/A4 paper. It can handle paper sizes ranging from A6 up to A3
(11x17 inch), with a paper weight range from 60 to 215gsm (16 to 58lb). The following
options are available:
– Collation
–Stapling
• Office Finisher LX - The office finisher LX has two output options. The center tray has a
capacity of 200 sheets of 80gsm (20lb.) paper and the stacker tray has a capacity of up to
2000 sheets, depending on paper size. The office finisher LX has the following output options:
– Collation
–Stacking
–Stapling
– Hole Punching
With the optional booklet maker installed, the office finisher LX can produce pre-creased, sta-
pled booklets.
Customer Replaceable Units (CRUs)
The Xerox® VersaLink® B7025/B7030/B7035 machines have these CRUs:
• Toner cartridge
• Xerographic cartridge
• Bias transfer roller (non-marketed CRU).
• Fuser (non-marketed CRU).
Table 1 Product codes
Configuration Product Code Voltage
25/30/35ppm - Desktop 7CX 120V
25/30/35ppm - Desktop 7CXN 120V GSA
25/30/35ppm - Desktop 9CX 220V
25/30/35ppm w/ 1TM 2DA 120V
25/30/35ppm w/ 1TM 2DAN 120V GSA
25/30/35ppm w/ 1TM 4DA 220V
25/30/35ppm w/ TTM 5DA 120V
25/30/35ppm w/ TTM 5DAN 120V GSA
25/30/35ppm w/ TTM 7DA 220V
STM
1TM
3TM
TTM
High capacity feeder
To Next Page
Loading...
Need help?
General
Weight and Dimensions
