April 2017
2-280
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-785, 018-786
Launch Issue
Status Indicator RAPs
018-785 LDAP Protocol Error 85 RAP
018-785 LDAP protocol error 85 at address book operation (search timeout).
Procedure
Verify that print jobs are printing or print a configuration report and verify that network setup
settings are indicated.
The printer is operational or the configuration report indicates
valid network settings.
YN
Check for damage with the network connection. If there is no damage then there is a
problem with the network. Tell the customer that the network requires service.
Ask the customer to retry search with narrower search target by changing search condition/
search start position in Address Book internal data. Ask the customer to verify the machine
LDAP setups. If the check is OK, there may be a problem with the remote LDAP server.
018-786 LDAP Protocol Errors 86 to 97 RAP
018-786 LDAP protocol error 86 at address book operation (an unknown authentication
method has been specified).
018-787 LDAP protocol error 87 at address book operation (mistake in definition of search fil-
ter).
018-788 LDAP protocol error 88 at address book operation (instruction canceled).
018-789 LDAP protocol error 89 at address book operation (an incorrect parameter was
passed).
018-790 LDAP protocol error 90 at address book operation (insufficient memory).
018-791 LDAP protocol error 91 at address book operation (server connection prohibited).
018-792 LDAP protocol error 92 at address book operation (unsupported function).
018-793 LDAP protocol error 93 at address book operation (result is not returned).
018-794 LDAP protocol error 94 at address book operation (result no longer exist).
018-795 LDAP protocol error 95 at address book operation (result still exist).
018-796 LDAP protocol error 96 at address book operation (client loop detected).
018-797 LDAP protocol error 97 at address book operation (maximum hop number for refer-
ence is exceeded).
Procedure
Verify that print jobs are printing or print a configuration report and verify that network setup
settings are indicated.
The printer is operational or the configuration report indicates
valid network settings.
YN
Check for damage with the network connection. If there is no damage then there is a
problem with the network. Inform the customer that the network requires service.
There is a problem with the LDAP setups on the machine or with the remote LDAP server.
Advise the customer to verify the machine LDAP setups. If the check is good, there may be a
problem with the remote LDAP server.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
