April 2017
2-538
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
117-333, 117-339
Launch Issue
Status Indicator RAPs
117-333 Uninitialized Used SD Card RAP
117-333 An uninitialized SD card that was used for another device was detected.
Procedure
Perform the steps that follow:
1. Initialize the NVM, perform dC301 NVM Initialization.
2. If a HDD is installed, initialise the HDD, refer to dC355 Hard Disk Diagnostics.
117-339 NVM Backup Fail RAP
117-339 NVM backup is not carried out fail.
Procedure
Initialise the HDD, refer to dC355 Hard Disk Diagnostics.
To Next Page
Loading...
