Chapter 14 Auto-Healing
ZyWALL Series CLI Reference Guide
114
14.2.1 Auto-Healing Examples
This example enables auto-healing and sets the power level (in dBm) to which the neighbor APs of the
failed AP increase their output power.
auto-healing power-threshold <-50~-80>
Sets a power threshold (in dBm). This value is used to
calculate the power level (power-threshold +
margin) to which the neighbor APs of the failed AP
increase their output power in order to extend their
wireless service coverage areas.
When the failed AP is working again, its neighbor APs
return their output power to the original level.
auto-healing margin
Enters a number from 0 to 9. This value is used to
calculate the power level (power-threshold +
margin) to which the neighbor APs of the failed AP
increase their output power in order to extend their
wireless service coverage areas.
auto-healing update
Sets all manged APs to immediately scan their
neighborhoods three times in a row and update their
neighbor lists to the AP controller (Zyxel Device).
show auto-healing config
Displays the current auto-healing configuration.
Table 45 Command Summary: Auto-Healing (continued)
COMMAND DESCRIPTION
Router(config)# auto-healing activate
Router(config)# auto-healing power-threshold -70
Router(config)# show auto-healing config
auto-healing activate: yes
auto-healing interval: 10
auto-healing power threshold: -70 dBm
auto-healing healing threshold: -85 dBm
auto-healing margin: 0
Router(config)#
To Next Page
Loading...
