ZyXEL Communications ZyWALL 310 - 42.3 IDP Profile Commands; 42.3.1 Global Profile Commands

Chapter 42 IDP Commands
ZyWALL Series CLI Reference Guide
352
42.3 IDP Profile Commands
42.3.1 Global Profile Commands
Use these commands to rename or delete existing profiles and show IDP base profiles.
Table 193 Global Profile Commands
COMMAND DESCRIPTION
idp rename signature
profile1 profile2
Rename an IDP signature originally named profile1 to profile2.
no idp signature profile3
Delete an IDP signature or system protect profile named profile3.
idp signature profile
signature sid {activate |
log [alert] | action {drop
| reject-sender | reject-
receiver | reject-both}}
Sets the action and log for the specified signature.
idp signature mode
{detection | prevention}
Sets what the Zyxel Device does when a stream of data matches a
malicious signature.
• detection: The Zyxel Device only creates a log message. The default
IDP profile changes to default_detect_only.
• prevention: The Zyxel Device performs a user-specified action. The
default IDP profile changes to default_profile.
show idp signature profile
signature all details
Lists the settings for all of the specified profile’s signatures. Use |more to
display the settings page by page.
show idp signature all
details
Lists the settings for all of the signatures. Use |more to display the settings
page by page.
show idp {signature |
anomaly} base profile
Displays all IDP signature or system protect base profiles.
show idp signature base
profile
{all|none|wan|lan|dmz}
settings
Lists the specified signature base profile’s settings. Use |more to display
the settings page by page.
show idp signature profiles
Displays IDP profiles created.
show idp signature mode
Displays the IDP scan mode.
show idp engine version
Displays the IDP engine version.
show idp signature profile
signature sid details
Displays specified signature details.