Chapter 6 AP Management
ZyWALL Series CLI Reference Guide
58
Figure 15 AP Network Roles Application
6.1.2 Airtime Fairness
Airtime is the time it takes for a client to receive packets from the AP it is associated with. The amount of
time each client needs may vary depending on various reasons, such as the distance between the
client and the AP, the client’s operating system, or the IEEE standard the client is using.
Airtime fairness is a feature that makes sure all connected clients of an AP get the same amount of time
to receive packets. Without airtime fairness, a client that needs more airtime will take up more time and
bandwidth of an AP to receive packets. This will slow down your WiFi network overall.
6.2 AP Management Value
The following table identifies the values required for many of these commands. Other input values are
discussed with the corresponding commands.
Table 13 Input Values for AP Management Commands
LABEL DESCRIPTION
ap_mac
The Ethernet MAC address of the managed AP. Enter 6 hexidecimal pairs separated by
colons. You can use 0-9, a-z and A-Z.
ap_model
The model name of the managed AP, such as NWA5160N, NWA5560-N, NWA5550-N,
NWA5121-NI or NWA5123-NI.
slot_name
The slot name for the AP’s on-board wireless LAN card. Use either slot1 or slot2. (The
NWA5560-N supports up to 2 radio slots.)
profile_name
The wireless LAN radio profile name. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is case-
sensitive.
To Next Page
Loading...
