Chapter 58 Certificates
ZyWALL Series CLI Reference Guide
499
58.5 Certificates Commands Examples
The following example creates a self-signed X.509 certificate with IP address 10.0.0.58 as the common
name. It uses the RSA key type with SHA512. Then it displays the list of local certificates. Finally it deletes
the pkcs12request certification request.
Router# configure terminal
Router(config)# ca generate x509 name test_x509 cn-type ip cn 10.0.0.58 key-
type rsa key-len 512
Router(config)# show ca category local
certificate: default
type: SELF
subject: CN=ZyWALL-1050_Factory_Default_Certificate
issuer: CN=ZyWALL-1050_Factory_Default_Certificate
status: VALID
ID: ZyWALL-1050_Factory_Default_Certificate
type: EMAIL
valid from: 2003-01-01 00:38:30
valid to: 2022-12-27 00:38:30
certificate: test
type: REQ
subject: CN=1.1.1.1
issuer: none
status: VALID
ID: 1.1.1.1
type: IP
valid from: none
valid to: none
certificate: pkcs12request
type: REQ
subject: CN=1.1.1.2
issuer: none
status: VALID
ID: 1.1.1.2
type: IP
valid from: none
valid to: none
certificate: test_x509
type: SELF
subject: CN=10.0.0.58
issuer: CN=10.0.0.58
status: VALID
ID: 10.0.0.58
type: IP
valid from: 2006-05-29 10:26:08
valid to: 2009-05-28 10:26:08
Router(config)# no ca category local pkcs12request