Chapter 59 ISP Accounts
ZyWALL Series CLI Reference Guide
501
59.1.2 Cellular Account Commands
The following table lists the cellular ISP account commands.
[no] idle <0..360>
Sets the idle timeout for the specified ISP account. The no
command sets the idle timeout to zero.
[no] service-name {ip |
hostname | service_name}
Sets the service name for the specified PPPoE ISP account. The
no command clears the service name.
hostname: You may up to 63 alphanumeric characters, dashes (-
), or periods (.), but the first character cannot be a period.
service_name: You can use up to 63 alphanumeric characters,
underscores (_), dashes (-), and
@$./ characters.
[no] server ip
Sets the PPTP server for the specified PPTP ISP account. The no
command clears the server name.
[no] encryption {nomppe |
mppe-40 | mppe-128}
Sets the encryption for the specified PPTP ISP account. The no
command sets the encryption to nomppe.
[no] connection-id
connection_id
Sets the connection ID for the specified PPTP ISP account. The no
command clears the connection ID.
connection_id: You can use up to 31 alphanumeric characters,
underscores (_), dashes (-), and colons (:).
Table 284 PPPoE and PPTP ISP Account Commands (continued)
COMMAND DESCRIPTION
Table 285 Cellular Account Commands
COMMAND DESCRIPTION
show account cellular
profile_name
Displays information about the specified account.
[no] account cellular
profile_name
Creates a new cellular ISP account with name profile_name if
necessary and enters sub-command mode. The
no command
deletes the specified ISP account.
profile_name: the cellular ISP account name format is “cellularx”
where “x” is a number. For example, cellular1.
[no] apn access_point_name
Sets the Access Point Name (APN) for the cellular ISP account. The no
command clears the APN.
access_point_name: Use up to 63 alphanumeric characters and
underscores (_), dashes (-), periods (.), and
/@\$#.
[no] dial-string
isp_dial_string
Sets the dial string for the specified ISP account. The no command
clears the dial-string.
isp_dial_string: Use up to 63 alphanumeric characters and
underscores (_), dashes (-), periods (.), and
/@\$#.
[no] user username
Sets the username for the specified ISP account. The no command
clears the username.
username: Use up to 64 alphanumeric characters and underscores
(_), dashes (-), periods (.), and
/@\$#.
[no] password password
Sets the password for the specified ISP account. The no command
clears the password.
password: Use up to 63 printable ASCII characters. Spaces are not
allowed.
To Next Page
Loading...
