Chapter 32 Hotspot
ZyWALL Series CLI Reference Guide
268
32.4 Printer Manager Overview
You can create dynamic guest accounts and print guest account information by pressing the button on
an external statement printer, such as SP350E. Make sure that the printer is connected to the
appropriate power and the Zyxel Device, and that there is printing paper in the printer. Refer to the
printer’s documentation for details.
32.5 Printer-manager Commands
This table lists the printer-manager commands. You must use the configure terminal command
to enter the configuration mode before you can use these commands.
payment-service provider
paypal gateway payment_gw_url
Defines the PayPal gateway.
payment_gw_url: Enter the address of the PayPal gateway provided to you by
PayPal after applying for your PayPal account.
payment-service check paypal-
currency
Displays the currency in which PayPal payments are made.
Table 137 payment-service paypal Sub-commands (continued)
COMMAND DESCRIPTION
Table 138 printer-manager Commands
COMMAND DESCRIPTION
[no] printer-manager activate
Allows the Zyxel Device to manage and moniter the printer status.
The no command disables printer management on the Zyxel Device.
printer-manager discover
Detects the printer(s) that is connected to the Zyxel Device and display the
printer information.
printer-manager button {a | b | c}
profile_name
Applies the specified billing profile to a button of the web-based account
generator and/or the button on a connected statement printer
[no] printer-manager encrypt
activate
Turns on data encryption. Data transmitted between the Zyxel Device and the
printer will be encrypted with a secret key.
The no command disables data encryption.
printer-manager encrypt secret-key
secret_key
Sets a key for data encryption.
secret_key: four alphanumeric characters (A-Z, a-z, 0-9)
printer-manager multi-printout
<1..3>
Sets how many copies of subscriber statements you want to print (1 is the
default).
printer-manager port <1..65535>
Sets the number of port on which the Zyxel Device sends data to the printer for
it to print.
[no] printer-manager printer
<1..10>
Enters the printer-manager printer sub-command mode to configure a
printer that can be managed by the Zyxel Device. See Table 135 on page 263
for the sub-commands.
The no command removes the specified printer from the printer list.
printer-manager printer append
Enters the printer-manager printer sub-command mode to add a printer
to the end of the printer list. See Table 135 on page 263 for the sub-commands.
To Next Page
Loading...
