Chapter 40 Reputation Filter
ZyWALL Series CLI Reference Guide
330
40.2.1 Update IP Reputation Signatures
Use these commands to update new signatures. You should have already registered for IP reputation
service.
40.2.2 IP Reputation Statistics
The following table describes the commands for collecting and displaying IP reputation statistics. You
must use the
configure terminal command to enter the configuration mode before you can use
these commands.
40.2.3 IP Reputation External Black List
The following table describes the commands for enabling and configuring an external database of
black listed IP addresses. The Zyxel Device blocks incoming and outgoing packets from the addresses in
Table 177 Update Signatures
COMMAND DESCRIPTION
ip-reputation update
signatures
Immediately downloads signatures from an update server.
[no] ip-reputation update
auto
Enables (disables) automatic signature downloads at regular times and
days.
ip-reputation update daily
<0..23>
Enables automatic signature download every day at the time specified.
ip-reputation update hourly
Enables automatic signature download every hour.
ip-reputation update weekly
{sun | mon | tue | wed |
thu | fri | sat} <0..23>
Enables automatic signature download once-a-week at the time and day
specified.
show ip-reputation
signature update
Displays signature update schedule.
show ip-reputation update
status
Displays signature update status.
show ip-reputation search
{Ipv6Address | Ipv4Address}
Searches for the specified IPv4 or IPv6 address in the Zyxel Device’s internal
and external IP reputation databases, and then displays the IP address’s
threat level.
Table 178 Commands for IP Reputation Statistics
COMMAND DESCRIPTION
ip-reputation statistics
flush
Clears the collected IP reputation statistics.
[no] ip-reputation
statistics collect
Turns the collection of IP reputation statistics on or off.
show ip-reputation
statistics recent-
activities
Displays a list of connection attempts to or from the IP reputation
addresses.
show ip-reputation
statistics collect status
Displays whether the collection of IP reputation statistics is turned on or off.
show ip-reputation
statistics summary
Displays the collected IP reputation statistics.