Chapter 6 AP Management
ZyWALL Series CLI Reference Guide
64
6.3.1 AP Management Commands Example
The following example shows you how to add an AP to the management list, and then edit it.
Router# show capwap ap wait-list
index: 1
IP: 192.168.1.35, MAC: 00:11:11:11:11:FE
Model: NWA5160N, Description: AP-00:11:11:11:11:FE
index: 2
IP: 192.168.1.36, MAC: 00:19:CB:00:BB:03
Model: NWA5160N, Description: AP-00:19:CB:00:BB:03
Router# configure terminal
Router(config)# capwap ap add 00:19:CB:00:BB:03
Router(config)# capwap ap 00:19:CB:00:BB:03
Router(AP 00:19:CB:00:BB:03)# slot1 ap-profile approf01
Router(AP 00:19:CB:00:BB:03)# exit
Router(config)# show capwap ap all
index: 1
Status: RUN
IP: 192.168.1.37, MAC: 40:4A:03:05:82:1E
Description: AP-404A0305821E
Model: NWA5160N
R1 mode: AP, R1Prof: default
R2 mode: AP, R2Prof: n/a
Station: 0, RadioNum: 2
Mgnt. VLAN ID: 1, Tag: no
WTP VLAN ID: 1, WTP Tag: no
Force VLAN: disable
Firmware Version: 2.25(AAS.0)b2
Recent On-line Time: 08:43:04 2013/05/24
Last Off-line Time: N/A
Router(config)# show capwap ap 40:4A:03:05:82:1E slot1 detail
index: 1
SSID: Zyxel, BSSID: 40:4A:03:05:82:1F
SecMode: NONE, Forward Mode: Local Bridge, Vlan: 1
Router(config)# show capwap ap all statistics
index: 1
Status: RUN, Loading: -
AP MAC: 40:4A:03:05:82:1E
Radio: 1, OP Mode: AP
Profile: default, MAC: 40:4A:03:05:82:1F
Description: AP-404A0305821E
Model: NWA5160N
Band: 2.4GHz, Channel: 6
Station: 0
RxPkt: 4463, TxPkt: 38848
RxFCS: 1083323, TxRetry: 198478
To Next Page
Loading...
