ZyXEL Communications ZyWALL 310 - 50.2 User;Group Commands Summary; 50.2.1 User Commands

Chapter 50 User/Group
ZyWALL Series CLI Reference Guide
446
50.2 User/Group Commands Summary
The following table identifies the values required for many username/groupname commands. Other
input values are discussed with the corresponding commands.
The following sections list the username/groupname commands.
50.2.1 User Commands
The first table lists the commands for users.
Table 248 username/groupname Command Input Values
LABEL DESCRIPTION
username
The name of the user (account). You may use 1-31 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
groupname
The name of the user group. You may use 1-31 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive. It cannot be the
same as the user name.
Table 249 username/groupname Commands Summary: Users
COMMAND DESCRIPTION
show username [username]
Displays information about the specified user or
about all users set up in the Zyxel Device.
username username nopassword user-type
{admin | guest | limited-admin | user}
Creates the specified user (if necessary), disables
the password, and sets the user type for the
specified user.
username username password password user-
type {admin | guest | limited-admin | user}
Creates the specified user (if necessary); enables
and sets the password; and sets the user type for the
specified user.
password: You can use 1-63 printable ASCII
characters, except double quotation marks (“) and
question marks (?).
username username user-type ext-user
Creates the specified user (if necessary) and sets the
user type to Ext-User.
username username user-type mac-address
Creates the specified user (if necessary) and sets the
user type to mac-address.
username username user-type ext-group-user
associated-aaa-server server_profile
group-id id
Specifies the value of the AD or LDAP server’s Group
Membership Attribute that identifies the group to
which the specified ext-group-user type user
account belongs.
username username encrypted-password
<password>
Sets the password for the specified user.
no username username
Deletes the specified user.
username rename username username
Renames the specified user (first username) to the
specified username (second username).
username username [no] description
description
Sets the description for the specified user. The no
command clears the description.
description: You can use alphanumeric and
()+/:=?!*#@$_%- characters, and it can be up
to 60 characters long.