Chapter 56 Authentication Objects
ZyWALL Series CLI Reference Guide
480
CHAPTER 56
Authentication Objects
This chapter shows you how to select different authentication methods for user authentication using the
AAA servers or the internal user database.
56.1 Authentication Objects Overview
After you have created the AAA server objects, you can specify the authentication objects (containing
the AAA server information) that the Zyxel Device uses to authenticate users (using VPN or managing
through HTTP/HTTPS).
56.2 aaa authentication Commands
The following table lists the aaa authentication commands you use to configure an
authentication profile.
Table 274 aaa authentication Commands
COMMAND DESCRIPTION
aaa authentication
rename profile-name-
old profile-name-new
Changes the profile name.
profile-name: You may use 1-31 alphanumeric characters, underscores(
_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
clear aaa
authentication
profile-name
Deletes all authentication profiles or the specified authentication profile.
Note: You can NOT delete a profile that is currently in use.
show aaa
authentication
{group-
name|default}
Displays the specified authentication server profile settings.
[no] aaa
authentication
profile-name
Sets a descriptive name for the authentication profile. The no command deletes a
profile.
aaa authentication
default member1
[member2] [member3]
[member4]
Sets the default profile to use the authentication method(s) in the order specified.
member = group ad, group ldap, group radius, or local.
Note: You must specify at least one member for each profile. Each type of
member can only be used once in a profile.
To Next Page
Loading...
