Chapter 49 Device Insight
ZyWALL Series CLI Reference Guide
441
49.1.1 Device Insight Commands
This table lists the commands for Device Insight.
The following table describes the commands available for Device Insight. You must use the configure
terminal
commands to enter the configuration mode before you can use the configuration
commands. Commands that do not have IPv6 specified in the description are for IPv4.
Table 243 Command Summary: Device Insight
COMMAND DESCRIPTION
show device info all
Displays all connected clients status and information.
show device info mac <mac
address>
Displays information of a client with the specified MAC address.
show device info ip <ip address>
Displays information of a client with the specified IP address.
[no] device identify activate
Enables Device Insight to identify connected clients.
Use the
no command to disable this feature.
show device identify status
Displays whether Device Insight is on or off.
[no] device block mac <mac
address>
Blocks a client with the specified MAC address.
Use the
no command to unblock an MAC address.
device remove mac <mac address>
Removes a client with the specified MAC address that’s no longer
connected to your network.
[no] device mac <mac address>
description <description>
Enters a client MAC address to set a description for the client.
Use the
no command to delete the description for this client.
show device profile all
Displays all device insight profiles settings.
show device profile <profile
name>
Enters a profile name to show the specified profile settings.
Table 244 Command Summary: Device Insight Profiles
COMMAND DESCRIPTION
[no] device profile <profile
name>
Creates a Device Insight profile. You may use 1-31 alphanumeric
character, underscores (_), or dashes (-), but the first character
cannot be a number. Spaces and duplicate names are not
allowed. This value is case-sensitive
Use the
no command to delete the specified profile.
device profile rename <profile
name> <profile name>
Renames the specified Device Insight profile (first profile name)
to the specified Device Insight profile name (second profile
name).
show reference object device
<profile name>
Displays which configuration settings reference the specified
Device Insight profile.
device remove mac <mac address>
Removes a client from the table that’s no longer connected to
your network.
For example, guest A visited your company over a month ago.
Guest A used his cellphone to connect to your Zyxel Device
networks. Guest A has left for over a month and you’re sure he will
not return in the near future. You can remove his device using this
command.
Please note that clients that are blocked cannot be removed.
Make sure to unblock clients before you remove them.
To Next Page
Loading...
