ZyWALL Series CLI Reference Guide
596
CHAPTER 72
Miscellaneous
72.1 SDWan OnCloud
From firmware version 5.0 and later, certain models of Zyxel Device can be managed by Nebula Control
Center (NCC).
72.2 Watchdog Timer
This section provides information about the Zyxel Device’s watchdog timers.
72.2.1 Hardware Watchdog Timer
The hardware watchdog has the system restart if the hardware fails.
The hardware-watchdog-timer commands are for support engineers.
It is recommended that you not modify the hardware watchdog timer
settings.
72.2.2 Software Watchdog Timer
The software watchdog has the system restart if the core firmware fails.
Table 342 SDWAn Commands
COMMAND DESCRIPTION
show sdwan oncloudst
Displays whether NCC is managing the Zyxel Device.
Table 343 hardware-watchdog-timer Commands
COMMAND DESCRIPTION
[no] hardware-watchdog-
timer <4..37>
Sets how long the system’s hardware can be unresponsive before resetting.
The no command turns the timer off.
show hardware-watchdog-
timer status
Displays the settings of the hardware watchdog timer.