ZyXEL Communications ZyWALL 310 - 42.8.1 IDP Packet Capture Example

Chapter 42 IDP Commands
ZyWALL Series CLI Reference Guide
365
42.8.1 IDP Packet Capture Example
This example shows how to capture network traffic that triggers the specified IDP signature.
This example shows how to return IDP packet capture settings to factory defaults.
Router# idp packet-capture enable
Router# idp packet-capture select enable
Router# idp packet-capture select add-id
<0..4294967295>
Router# idp packet-capture select add-id 12345
Router# idp packet-capture show status
ips pkt capture status info:
enable: 1
user select sig_id enable: 1
----------------------------------------------------------
current pkt count: 0
current sig count: 0
current session count: 0
current mem size: 0
current file size: 0
----------------------------------------------------------
user select sig id count: 1
12345,
Router# idp packet-capture default setting
Router# idp packet-capture
default disable enable select show
Router# idp packet-capture show status
ips pkt capture status info:
enable: 1
user select sig_id enable: 0
----------------------------------------------------------
current pkt count: 0
current sig count: 0
current session count: 0
current mem size: 0
current file size: 0
----------------------------------------------------------
user select sig id count: 0