Chapter 55 AAA Server
ZyWALL Series CLI Reference Guide
475
55.2.3 radius-server Commands
The following table lists the radius-server commands you use to set the default RADIUS server.
55.2.4 radius-server Command Example
The following example sets the secret key and timeout period of the default RADIUS server
(172.23.10.100) to “87643210” and 80 seconds.
[no] ldap-server password-
encrypted password
Sets an encrypted bind password. The no command clears this
setting.
[no] ldap-server port port_no
Sets the LDAP port number. Enter a number between 1 and 65535.
The default is 389. The no command clears this setting.
[no] ldap-server search-time-
limit time
Sets the search timeout period (in seconds). Enter a number
between 1 and 300. The no command clears this setting.
[no] ldap-server ssl
Enables the Zyxel Device to establish a secure connection to the
LDAP server. The
no command disables this feature.
Table 269 ldap-server Commands (continued)
COMMAND DESCRIPTION
Table 270 radius-server Commands
COMMAND DESCRIPTION
show radius-server
Displays the default RADIUS server settings.
[no] radius-server host
radius_server auth-port
auth_port
Sets the RADIUS server address and service port number. Enter the IP
address (in dotted decimal notation) or the domain name of a
RADIUS server. The
no command clears the settings.
[no] radius-server key secret
Sets a password (up to 15 alphanumeric characters) as the key to be
shared between the RADIUS server and the Zyxel Device. The
no
command clears this setting.
[no] radius-server timeout time
Sets the search timeout period (in seconds). Enter a number
between 1 and 300. The
no command clears this setting.
Router# configure terminal
Router(config)# radius-server host 172.23.10.100 auth-port 1812
Router(config)# radius-server key 876543210
Router(config)# radius-server timeout 80
Router(config)# show radius-server
host : 172.23.10.100
authentication port: 1812
key : 876543210
timeout : 80
Router(config)#
To Next Page
Loading...
