ZyXEL Communications ZyWALL 310 - 24.3.1 Redirect Command Example

Chapter 24 Redirect Service
ZyWALL Series CLI Reference Guide
210
24.3.1 Redirect Command Example
The following commands show how to create and display Redirect service rules on the Zyxel Device.
Router(config)# redirect-service append
Router(redirect-service)# interface ge4
Router(redirect-service)# name test
Router(redirect-service)# port 11111
Router(redirect-service)# service smtp-redirect
Router(redirect-service)# server 1.1.1.1
Router(redirect-service)# user admin
Router(redirect-service)# activate
Router(redirect-service)# exit
Router(config)# show redirect-service
redirect service rule: 1
active: yes
name: default
service: http-redirect
user: any
incoming interface: any
source address: any
server:
port: 80
id: 1
redirect service rule: 2
active: yes
name: default
service: http-redirect
user: any
incoming interface: any
source address: any
server:
port: 80
id: 0
redirect service rule: 3
active: yes
name: default
service: append
user: any
incoming interface: any
source address: any
server:
port: 80
id: 2
redirect service rule: 4
active: yes
name: test
service: smtp-redirect
user: admin
incoming interface: ge4
source address: any
server: 1.1.1.1
port: 11111
id: 3
Router(config)#