ZyWALL Series CLI Reference Guide
471
CHAPTER 54
Schedules
Use schedules to set up one-time and recurring schedules for policy routes, firewall rules, application
patrol, and content filtering.
54.1 Schedule Overview
The Zyxel Device supports two types of schedules: one-time and recurring. One-time schedules are
effective only once, while recurring schedules usually repeat.
Note: Schedules are based on the current date and time in the Zyxel Device.
One-time schedules begin on a specific start date and time and end on a specific stop date and time.
One-time schedules are useful for long holidays and vacation periods.
Recurring schedules begin at a specific start time and end at a specific stop time on selected days of
the week (Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday). Recurring schedules
always begin and end in the same day. Recurring schedules are useful for defining the workday and off-
work hours.
54.2 Schedule Commands Summary
The following table describes the values required for many schedule commands. Other values are
discussed with the corresponding commands.
The following table lists the schedule commands.
Table 266 Input Values for Schedule Commands
LABEL DESCRIPTION
object_name
The name of the schedule. You may use 1-31 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
time
24-hour time, hours and minutes; <0..23>:<0..59>.
Table 267 schedule Commands
COMMAND DESCRIPTION
show schedule-object
Displays information about the schedules in the Zyxel
Device.
no schedule-object object_name
Deletes the schedule object.
To Next Page
Loading...
