Chapter 71 Maintenance Tools
ZyWALL Series CLI Reference Guide
593
71.2.1 High Availability Reboot Process
Figure 69 High Availability Reboot Process Flow
The following table describes the schedule reboot commands.
Table 340 Scheduled Reboot Commands
COMMAND DESCRIPTION
[no] schedule reboot activate
Enables or disables the reboot schedule. When enabled, the
Zyxel Device will restart according to the schedule.
schedule reboot daily <time,hh:mm>
Sets the device to restart once a day at the specified hour and
minute.
hh:mm is in 24-hour format, for example 23:30.
schedule reboot weekly
<time,hh:mm>
{sun|mon|tue|wed|thu|fri|sat}
Sets the device to restart once a week on the specified day, at
the specified hour and minute.
hh:mm is in 24-hour format, for example 23:30.
schedule reboot monthly
<time,hh:mm> <day,dd>
Sets the device to restart once a month on the specified day, at
the specified hour and minute.
dd must be written as two digits. The valid range is 01–28.
To Next Page
Loading...
