ZyXEL Communications ZyWALL 310 - 62.2.1 dynamic-guest Sub-commands

Chapter 62 Dynamic Guest Accounts
ZyWALL Series CLI Reference Guide
510
62.2.1 dynamic-guest Sub-commands
The following table describes the sub-commands for several dynamic-guest commands. Note that not
all rule commands use all the sub-commands listed here.
show dynamic-guest log
Displays all the dynamic guest accounts which are either active or expired.
show dynamic-guest log create-time
begin yyyy-mm-dd hh:mm end yyyy-
mm-dd hh:mm
Displays all the active and/or expired dynamic guest accounts that were
generated within a specified period of time.
show dynamic-guest users
Displays all the active dynamic guest accounts on the Zyxel Device.
Table 289 dynamic-guest Commands (continued)
COMMAND DESCRIPTION
Table 290 dynamic-guest Sub-commands
COMMAND DESCRIPTION
bandwidth {upload | download}
<0..1048576> priority <1..7>
Specifies the maximum bandwidth allowed for the user account in kilobits per
second and types a number between 1 and 7 to set the priority for the user’s
traffic. The smaller the number, the higher the priority.
upload refers to the traffic the Zyxel Device sends out from a user.
download refers to the traffic the Zyxel Device sends to a user.
[no] bandwidth activate
Turns on bandwidth management for the user account.
The no command disables bandwidth management for the user account.
charge price
Sets the account’s price, up to 99999999.99, per time unit.
create-time yyyy-mm-dd hh:mm
Sets the date and time the account is created.
currency {eur |gbp |usd |
user-define curreny_code}
Sets the currency for the charge, which is displayed in the UI.
•eur: Euros.
• gbp: British pounds
• USD: American dollars
• user-define: Specify any three-letter currency name
e-mail email_address
Sets an email address for the guest user.
encrypted-password password
Sets a new password for the dynamic user.
expire-time yyyy-mm-dd hh:mm
Sets the date and time the account becomes invalid.
login-mac mac_address
Sets the MAC address of the guest’s device. The guest account can then only
log in from this device.
name description
Sets a human-readable description for the dynamic user.
password password
Sets the password for the account.
payment-info {cash | payment-
service}
Sets the method of payment for the account.
phone phone_number
Sets the mobile phone number for the account.
printer-ip ip_address
quota {total | upload |
download} megabytes <0..1023>
Sets how much downstream and/or upstream data in Megabytes can be
transmitted through the external interface before the account expires. 0
means there is no data limit for the user account.