ZyXEL Communications ZyWALL 310 - 63.8.2 SMS Service Commands

Chapter 63 System
ZyWALL Series CLI Reference Guide
522
63.8.2 SMS Service Commands
The Zyxel Device supports Short Message Service (SMS) to send short text messages to mobile devices.
Note: Support for ViaNett on ZyWALL devices will end soon. In firmware version 4.60, all
ViaNett configuration settings have been removed from the Web Configurator UI. You
can still configure ViaNett using the CLI, but commands related to ViaNett will be
removed from the CLI in a future firmware update. We recommend not purchasing any
new ViaNett credits.
[no] smtp-address {ip |
hostname}
Sets the SMTP mail server IP address or domain name. The no
command removes the mail server IP address or domain name.
[no] smtp-auth activate
Enables or disables (no command) SMTP authentication.
[no] smtp-auth username
username password password
Sets or removes (no command) the username and password for
SMTP authentication.
The password can be up to 63 characters long.
[no] smtp-port <1..65535>
Sets the SMTP port. The no command deletes the setting.
[no] smtp-tls activate
Sets the mail server to use or not use (no command) Transport
Layer Security (TLS) for encrypted communications between the
mail server and the Zyxel Device.
[no] smtp-tls authenticate-
server
Sets the Zyxel Device to authenticates the mail server in the TLS
handshake or not (no command).
[no] smtp-tls starttls-off
The mail server uses SSL or TLS for encrypted communications
between the mail server and the Zyxel Device. This command
turns off STARTTLS and uses the TLS protocol. The no command
enables the default STARTTLS protocol (SSL) for encrypted
communications between the mail server and the Zyxel Device.
Table 298 mail-server commands
COMMAND DESCRIPTION
Table 299 sms-service Commands
COMMAND DESCRIPTION
sms-service account-send phone
phone_number account user_name
password password
Specifies the guest account information and the number of
mobile device to which you want to send a text message.
[no] sms-service activate
Enables the SMS service on the Zyxel Device.
The no command disabled the SMS service.
sms-service default-country-code
country_code
Sets the default country code for the mobile phone number to
which you want to send SMS messages.
country_code: one to four digits
sms-service provider vianett
Enters the sms-service-vianett sub-command mode to
configure your ViaNett account information.
[no] password password
Sets the password for your ViaNett account.
[no] username e-mail
Sets the user name for your ViaNett account.
sms-service provider-select
vianett {vianett|email-to-sms}
Selects vianett if you use ViaNett to help forward SMS
messages.
Selects
email-to-sms if you use another SMS gateway to help
forward SMS messages.