Chapter 31 Web Authentication
ZyWALL Series CLI Reference Guide
257
31.2.3 Facebook Wi-Fi Commands
This table lists the commands for Facebook Wi-Fi. You must use the configure terminal command
to enter the configuration mode before you can use these commands.
31.3 SSO Overview
SSO (Single Sign-On) integrates Domain Controller and Zyxel Device authentication mechanisms, so that
users just need to log in once (single login) to get access to permitted resources.
• The Zyxel Device, the DC, the SSO agent and the LDAP or AD server must all be in the same domain
and be able to communicate with each other.
• SSO does not support IPv6 or RADIUS; you must use it in an IPv4 network environment with Windows AD
(Active Directory) or LDAP (Lightweight Directory Access Protocol) authentication databases.
• You must enable Web Authentication to use SSO.
Table 131 fbwifi Commands
COMMAND DESCRIPTION
[no] fbwifi activate
Turns on Facebook Wi-Fi on the Zyxel Device. The no command
disables it.
[no] fbwifi idle-detection
Sets the Zyxel Device to monitor how long each user
(authenticated via Facebook Wi-Fi) is idle. The no command
disables the idle detection feature.
fbwifi idle-detection timeout
<1..60>
Specifies the user idle timeout between 1 and 60 minutes. The
Zyxel Device automatically disconnects a user (authenticated
via Facebook Wi-Fi) from the network after a period of inactivity.
fbwifi reset-fbpage
Removes the Facebook Page settings.
fbwifi security {high |low}
Sets when guests have to check into a business owner's
Facebook Page.
• fbwifi security high (default) only allows HTTP traffic,
and blocks all other Internet traffic (HTTPS, FTP, SSH, and so
on). Guests can browse using HTTP without checking in to the
business owner's Facebook Page. Check-in is necessary for
other Internet services such as WeChat, Line and so on.
• fbwifi security low only blocks HTTP traffic, and allows all
other Internet traffic (HTTPS, FTP, SSH, and so on). Guests that
browse using HTTP will be redirected to the business owner's
Facebook Page, and will need to check-in to continue
browsing the Internet. Check-in is not necessary for other
Internet services such as WeChat, Line and so on.
show fbwifi activate
Displays whether Facebook Wi-Fi is enabled on the Zyxel Device.
show fbwifi service-register
status
Displays whether the Zyxel Device has been registered with
myZyXEL.com.
show fbwifi status
Displays Facebook Wi-Fi settings on the Zyxel Device.
To Next Page
Loading...
