Chapter 51 Application Object
ZyWALL Series CLI Reference Guide
458
51.1.1.1 Application Object Examples
These are some example usage commands.
51.1.2 Application Object Group Commands
This table lists the application object group commands.
Router(config)# show application-object
Name
Description Ref
Content
=========================================================================
======
tests
New Create 1
Facebook Game (access)
Router(config)# show application-object tests
Name: tests
Description: New Create
Category Application
Application ID
=========================================================================
======
Social Network Facebook Game (access)
402685702
Router(config)#
Table 258 object-group application Commands
COMMAND DESCRIPTION
show object-group application <object>
Displays information on the named application object
group.
object-group application <object>
Creates an object group. with the specified name. You
may use 1-31 alphanumeric characters, underscores(
_),
or dashes (-), but the first character cannot be a number.
This value is case-sensitive. The no command disables it.
[no] description <description>
Write a description of the object group.
[no] application-object <object>
Adds the named application object to the object group.
The no command removes it.
[no] object-group <object>
Creates an object group. The no command removes it.
no object-group application <object>
Deletes the object group with the specified name.
object-group application rename
<object> <object>
Renames the specified object group with a new name.
To Next Page
Loading...
