ZyXEL Communications ZyWALL 310 - Page 459

Chapter 51 Application Object
ZyWALL Series CLI Reference Guide
459
51.1.2.1 Object Group Application Examples
These are some example usage commands.
Router(config)# show object-group application
Name
Description Ref
Member
=========================================================================
======
Router(config)# object-group application may
Router(group-application)# description rinse after use
Router(group-application)# exit
Router(config)# show object-group application
Name
Description Ref
Member
=========================================================================
======
may
rinse after use 0
tests
Router(config)#