Chapter 1 Command Line Interface
ZyWALL Series CLI Reference Guide
30
Figure 5 Web Console: Connecting
Then, the Password screen appears.
Figure 6 Web Console: Password
6 Enter the password for the user name you specified earlier, and click OK. If you enter the password
incorrectly, you get an error message, and you may have to close the console window and open it
again. If you enter the password correctly, the console screen appears.
Figure 7 Web Console
7 To use most commands in this User’s Guide, enter
configure terminal. The prompt should change
to
Router(config)#.
1.2.3 Telnet
Use the following steps to Telnet into your Zyxel Device.
To Next Page
Loading...
