ZyXEL Communications ZyWALL 310 - 55.2.1 ad-server Commands; 55.2.2 ldap-server Commands

Chapter 55 AAA Server
ZyWALL Series CLI Reference Guide
474
55.2.1 ad-server Commands
The following table lists the ad-server commands you use to set the default AD server.
55.2.2 ldap-server Commands
The following table lists the ldap-server commands you use to set the default LDAP server.
Table 268 ad-server Commands
COMMAND DESCRIPTION
show ad-server
Displays the default AD server settings.
[no] ad-server basedn basedn
Sets a base distinguished name (DN) for the default AD server. A base
DN identifies an AD directory. The no command clears this setting.
[no] ad-server binddn binddn
Sets the user name the Zyxel Device uses to log into the default AD
server. The
no command clears this setting.
[no] ad-server cn-identifier
uid
Sets the unique common name (cn) to identify a record. The no
command clears this setting.
[no] ad-server host
ad_server
Sets the AD server address. Enter the IP address (in dotted decimal
notation) or the domain name. The
no command clears this setting.
[no] ad-server password
password
Sets the bind password. This password will be encrypted when you use
the show ad-server command to display. The
no command clears this
setting.
[no] ad-server password-
encrypted password
Sets the encrypted password (less than 32 alphanumerical characters) in
order to hide the real password from people behind you when you are
configuring AD server password. This password is displayed as what you
typed when you use the show ad-server command.
[no] ad-server port port_no
Sets the AD port number. Enter a number between 1 and 65535. The
default is 389. The no command clears this setting.
[no] ad-server search-time-
limit time
Sets the search timeout period (in seconds). Enter a number between 1
and 300. The
no command clears this setting.
[no] ad-server ssl
Enables the Zyxel Device to establish a secure connection to the AD
server. The
no command disables this feature.
Table 269 ldap-server Commands
COMMAND DESCRIPTION
show ldap-server
Displays current LDAP server settings.
[no] ldap-server basedn basedn
Sets a base distinguished name (DN) for the default LDAP server. A
base DN identifies an LDAP directory. The
no command clears this
setting.
[no] ldap-server binddn binddn
Sets the user name the Zyxel Device uses to log into the default LDAP
server.
The no command clears this setting.
[no] ldap-server cn-identifier
uid
Sets the unique common name (cn) to identify a record.
The no command clears this setting.
[no] ldap-server host
ldap_server
Sets the LDAP server address. Enter the IP address (in dotted decimal
notation) or the domain name. The
no command clears this setting.
[no] ldap-server password
password
Sets the bind password. The no command clears this setting.