Chapter 60 SSL Application
ZyWALL Series CLI Reference Guide
503
CHAPTER 60
SSL Application
This chapter describes how to configure SSL application objects for use in SSL VPN.
60.1 SSL Application Overview
Configure an SSL application object to specify a service and a corresponding IP address of the server on
the local network. You can apply one or more SSL application objects in the VPN > SSL VPN screen for a
user account/user group.
60.1.1 SSL Application Object Commands
This table lists the commands for creating SSL application objects. You must use the configure
terminal
command to enter the configuration mode before you can use these commands.
Table 286 SSL Application Object Commands
COMMAND DESCRIPTION
show sslvpn application
[application_object]
Displays SSL VPN application objects.
[no] sslvpn application
application_object
Enters the sub-command mode to create an SSL VPN application
object.
server-type {file-sharing |
owa | web-server} url URL
[entry-point entry_point]
Specify the type of service for this SSL application.
file-sharing: create a file share application for SSL VPN.
owa: (Outlook Web Access) to allow users to access e-mails,
contacts, calenders via an Microsoft Outlook-like interface using
supported web browsers. The Zyxel Device supports one OWA
object.
web-server: to allow access to the specified web site hosted on
the local network.
url: Enter the fully qualified domain name (FQDN) or IP address of
the application server. You must enter the “http://” or “https://”
prefix. Remote users are restricted to access only files in this
directory. For example, if you enter “\remote\” in this field,
remote users can only access files in the “remote” directory.
entry-point: optional. Specify the name of the directory or file
on the local server as the home page or home directory on the
user screen.
To Next Page
Loading...
