Chapter 60 SSL Application
ZyWALL Series CLI Reference Guide
504
server-type file-sharing
share-path share-path
Specifies the IP address, domain name or NetBIOS name
(computer name) of the file server and the name of the share to
which you want to allow user access. Enter the path in one of the
following formats.
“\\<IP address>\<share name>”
“\\<domain name>\<share name>”
“\\<computer name>\<share name>”
For example, if you enter “\\my-server\Tmp”, this allows remote
users to access all files and/or folders in the “\Tmp” share on the
“my-server” computer.
server-type rdp server-
address server-address
[starting-
port <1..65535> ending-port
<1..65535>] [program-path
program-path]
Creates an SSL application object to allow users to manage LAN
computers that have Remote Desktop Protocol remote desktop
server software installed.
Specify the listening ports of the LAN computer(s) running remote
desktop server software. The Zyxel Device uses a port number
from this range to send traffic to the LAN computer that is being
remotely managed.
program-path: specify an application to open when a remote
user logs into the remote desktop application.
server-type vnc server-
address server-address
[starting-
port <1..65535> ending-port
<1..65535>]
Creates an SSL application object to allow users to manage LAN
computers that have Virtual Network Computing remote desktop
server software installed.
Specify the listening ports of the LAN computer(s) running remote
desktop server software. The Zyxel Device uses a port number
from this range to send traffic to the LAN computer that is being
remotely managed.
server-type weblink url url
Sets this to create a link to a web site you specified that you
expect the SSL VPN users to commonly use.
url: Enter the fully qualified domain name (FQDN) or IP address of
the application server. You must enter the “http://” or “https://”
prefix. For example, https://1.2.3.4. SSL VPN users are
restricted to access only web pages or files in this directory. For
example, if you enter “\remote\” in this field, remote users can
only access web pages or files in the “remote” directory.
If a link contains a file that is not within this domain, then SSL VPN
users cannot access it.
no server-type
Remove the type of service configuration for this SSL application.
[no] webpage-encrypt
Turn on web encrypt to prevent users from saving the web
content.
Table 286 SSL Application Object Commands
COMMAND DESCRIPTION
To Next Page
Loading...
