Chapter 49 Device Insight
ZyWALL Series CLI Reference Guide
442
49.1.2 Device Insight Command Examples
Here’s the process to use a Device Insight profile in a Zyxel Device security policy. Th example below
uses the parameters in this table.
device feedback mac <mac address>
category <category> os <os> type
<type>
Reports on a client that is wrongly identified regarding its category,
operating system or type. Enter the category, operating system or
type you believe is correct for the client.
[no] device profile <profile
name> description <description>
Sets a description for the specified Device Insight profile. You can
use up to 60 printable ASCII characters.
Use the
no command to delete the description for this profile.
[no] device profile <profile
name> category <category>
Configures the type of device used by the connected client for
the specified profile. The category includes:
•Computer
•Firewall
• Game Consoles
•IP Camera
•IP Phone
• IoT: A device with sensors and software that collects and
analyzes data. It exchanges the data it collects with other
devices over the Internet.
• Media Player
• Mobile Phone/Tablet
• Network Storage
•Printer
•Projector
•Router
•Smart TV
•Switch
• Wireless AP
• Others: A device will be sorted as others when the Zyxel Device
cannot sort the device into the categories above.
[no] device profile <profile
name> os <os>
Configures the device operating system used by the connected
client for the specified profile.
secure policy <1...500> device
<profile name>
Applies the specified profile to the specified secure policy.
Table 244 Command Summary: Device Insight Profiles (continued)
COMMAND DESCRIPTION
Table 245 Device Insight Profile Configuration Example
PROFILE NAME DESCRIPTION CATEGORY
OPERATING
SYSTEM
APPLIED POLICY
MobilePhone profile for mobile
clients
mobile-phone-
tablet
• Windows
•macOS
•Linux
•OS
• Android
•Others
LAN2_To_LAN1
To Next Page
Loading...
