ZyXEL Communications ZyWALL 310 - 8.2.1 AP Group Examples

Chapter 8 AP Group
ZyWALL Series CLI Reference Guide
76
8.2.1 AP Group Examples
The following example shows you how to create an AP group profile (named “TEST”) and configure the
AP’s first radio to work in repeater mode using the “default” radio profile and the “ZyMesh_TEST” ZyMesh
profile. It also adds the AP with the MAC address 00:a0:c5:01:23:45 to this AP group.
The following example shows you how to create an AP group profile (named GP1) and configure AP
load balancing in "by station" mode. The maximum number of stations is set to 1.
show ap-group-profile
ap_group_profile_name lan-
provision interface {all | vlan |
ethernet | ap_lan_port |
vlan_interface} model {nwa5301-nj
| wac6502d-e | wac6502d-s |
wac6503d-s | wac6553d-e}
Displays the LAN port and/or VLAN settings on the managed AP
which is in the specified AP group and of the specified model.
vlan_interface: the name of the VLAN, such as vlan0.
ap_lan_port: the Ethenet LAN port on the managed AP, such
as lan1 or lan2.
show ap-group-profile
ap_group_profile_name lan-
provision model
Shows the model name of the managed AP which
belongs to the specified AP group.
show ap-group-profile rule_count
Displays how many AP group profiles have been configured on
the Zyxel Device.
ap-group-profile rename
ap_group_profile_name1
ap_group_profile_name2
Gives an existing AP group profile (ap_group_profile_name1) a
new name (ap_group_profile_name2).
Table 19 Command Summary: AP Group (continued)
COMMAND DESCRIPTION
Router(config)# ap-group-profile TEST
Router(config-ap-group TEST)# slot1 repeater-ap default
Router(config-ap-group TEST)# exit
Router(config)# ap-group-member TEST member 00:a0:c5:01:23:45
Router(config)#
Router(config)# ap-group-profile GP1
Router(config-ap-group GP1)# load-balancing mode station
Router(config-ap-group GP1)# load-balancing max sta 1
Router(config-ap-group GP1)# exit
Router(config)# show ap-group-profile GP1 load-balancing config
AP Group Profile:GP1
load balancing config:
Activate: yes
Kickout: no
Mode: station
Max-sta: 1
Traffic-level: high
Alpha: 5
Beta: 10
Sigma: 60
Timeout: 20
LIInterval: 10
KickoutInterval: 20
Router(config)#