ZyXEL Communications ZyWALL 310 - Wireless Health; 11.1 Wireless Health Overview; 11.2 Wireless Health Commands

Chapter 11 Wireless Health
ZyWALL Series CLI Reference Guide
104
CHAPTER 11
Wireless Health
11.1 Wireless Health Overview
This chapter describes the wireless health commands. Wireless health is a way to measure the APs
wireless network performance in Zyxel Device networks. Wireless health is defined by the number of
times APs have to resend packets before packets are sent out successfully. The more times an AP has to
resend the packets, the poorer the state of wireless health the AP is in.
The Zyxel Device improves the wireless network performance by doing the following:
• Scan for the least busy channel bandwidth and select the channel with lease interference (Dynamic
Channel Selection).
• Direct clients to APs with a stronger WiFi signal.
11.2 Wireless Health Commands
The following table describes the commands available for the wireless health.
Table 35 Command Summary: Wireless Health
COMMAND DESCRIPTION
show wireless-health-action
Displays the wireless health settings.
show ap-info top 10 alert {2.4G |
5G | all}
Displays the top 10 APs that are in poor states of wireless health for
the most times.
show sta-info top 10 alert {2.4G
| 5G | all}
Displays how many times the client is in a poor state of wireless
health.