Chapter 64 System Remote Management
ZyWALL Series CLI Reference Guide
531
64.3.1 HTTP/HTTPS Command Examples
This following example adds a service control rule that allowed an administrator from the computers
with the IP addresses matching the Marketing address object to access the WAN zone using HTTP
service.
This command sets an authentication method Example used by the HTTP/HTTPS server to authenticate
the client(s).
This following example sets a certificate named MyCert used by the HTTPS server to authenticate itself to
the SSL client.
no ip http skip-csrf-check
Performs cross-site request forgery (CSRF) checking.
[no] ip http x-frame-options
Sets the x-frame-options header to SAMEORIGIN. The web
page can only be displayed in a frame on the same origin
(from the site/host which is the same as the one serving the
page).
The x-frame-options HTTP response header is a security
header that can help avoid clickjacking attacks by
indicating whether a browser is allowed to load a page in a
frame.
The
no command removes the header directive.
Note: This security is provided only for browsers that
support x-frame-options.
show ip http server status
Displays HTTP settings.
show ip http server secure status
Displays HTTPS settings.
show ip http skip-csrf-check
Shows whether cross-site request forgery (CSRF) checking is
done or not.
Table 306 Command Summary: HTTP/HTTPS (continued)
COMMAND DESCRIPTION
Router# configure terminal
Router(config)# ip http server table admin rule append access-group
Marketing zone WAN action accept
Router# configure terminal
Router(config)# ip http authentication Example
Router# configure terminal
Router(config)# ip http secure-server cert MyCert
To Next Page
Loading...
