Chapter 24 Redirect Service
ZyWALL Series CLI Reference Guide
209
[no] server <fqdn> <w.x.y.z>
Sets the fully-qualified domain name or IPv4 address for
the Redirect rule.
The no command clears the server.
[no] service {http-redirect | smtp-
redirect}
Configures HTTP-redirect or SMTP-redirect as the Redirect
rule.
The no command restores the service to http-redirect.
[no] source profile_name
Configures the address or address group object.
The no command restores the source to any.
[no] user user_name
Configures the user account or user group to which this
rule is applied.
The no command restores the user to any.
redirect-service flush
Clears all Redirect rules.
redirect-service insert <1..20>
Inserts a new Redirect rule at the specified location and
enters sub-command mode.
redirect-service move <1..20> to
<1..20>
Moves a Redirect rule to the specified location.
show redirect-service <1..20>
Displays details of the specified Redirect rule.
Table 106 Command Summary: Redirect (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
