ZyWALL Series CLI Reference Guide
65
The following example displays the management list and radio statistics for the specified AP.
Router(config)# show capwap ap all
index: 1
Status: RUN
IP: 192.168.1.37, MAC: 60:31:97:82:F5:AF
Description: AP-60319782F5AF
Model: WAC5302D-S
CPU Usage: 12 %
R1 mode: AP, R1Prof: default
R2 mode: AP, R2Prof: default2
AP Group Profile: default
Override Slot1 Radio Profile: disable
Override Slot1 SSID Profile: disable
slot1-SSID Profile 1: default
slot1-SSID Profile 2:
slot1-SSID Profile 3:
slot1-SSID Profile 4:
slot1-SSID Profile 5:
slot1-SSID Profile 6:
slot1-SSID Profile 7:
slot1-SSID Profile 8:
Override Slot1 Output Power: disable
Slot1 Output Power: 30dBm
Override Slot2 Radio Profile: disable
Override Slot2 SSID Profile: disable
slot2-SSID Profile 1: default
slot2-SSID Profile 2:
slot2-SSID Profile 3:
slot2-SSID Profile 4:
slot2-SSID Profile 5:
slot2-SSID Profile 6:
slot2-SSID Profile 7:
slot2-SSID Profile 8:
Override Slot2 Output Power: disable
Slot2 Output Power: 30dBm
Station: 2, RadioNum: 2
Override VLAN Setting: disable
Mgnt. VLAN ID: 1, Tag: no
WTP VLAN ID: 1, WTP Tag: no
Force VLAN: disable
Support Lan-provision: yes
Override LAN Provision: disable
Firmware Version: 5.00(ABFH.1)b1
Primary AC IP: broadcast
Secondary AC IP: N/A
Recent On-line Time: 03:15:30 2016/11/11
Last Off-line Time: 03:10:48 2016/11/11
Loop State: N/A
LED Status: N/A
Suppress Mode Status: Enable
Locator LED Status: N/A
Locator LED Time: 0
Locator LED Time Lease: 0
Power Mode: Full
Antenna Switch SW-Control: N/A
Antenna Switch Radio 1: N/A
Antenna Switch Radio 2: N/A
To Next Page
Loading...
