Chapter 40 Reputation Filter
ZyWALL Series CLI Reference Guide
329
show ip-reputation
signatures number
Displays the number of signatures in this set.
show ip-reputation
signatures version
Displays the signature set version number currently used by the Zyxel
Device. This number gets larger as new signatures are added.
[no] ip-reputation white-
list activate
Turns on the IP reputation white list, and the Zyxel Device will allow the
incoming packets that come from the listed IPv4 addresses.
ip-reputation white-list
{IPv4|IPv4CIDR}
{activate|deactivate}
Activates or deactivates the specified IPv4 address on the IP reputation
white list.
You can also add an IP address block using CIDR notation, for example
192.168.0.1/24.
ip-reputation white-list
replace <1..256> IPv4
{activate|deactivate}
Replaces the IPv4 address of the specified entry with a new one on the IP
reputation white list.
no ip-reputation white-list
IPv4
Removed the specified IPv4 address from the IP reputation white list.
[no] ip-reputation black-
list activate
Turns on the IP reputation black list, and the Zyxel Device will block the
incoming packets that come from the listed IPv4 addresses.
ip-reputation black-list
{IPv4|IPv4CIDR}
{activate|deactivate}
Activates or deactivates the specified IPv4 address on the IP reputation
black list.
You can also add an IP address block using CIDR notation, for example
192.168.0.1/24.
ip-reputation black-list
replace <1..256> IPv4
{activate|deactivate}
Replaces the IPv4 address of the specified entry with a new one on the IP
reputation black list.
no ip-reputation black-list
IPv4
Removed the specified IPv4 address from the IP reputation black list.
show ip-reputation {white-
list|black-list}
Displays the current IP reputation white or black list.
show ip-reputation {white-
list|black-list} status
Displays if the IP reputation white or black list is turned on or not.
[no] ip-reputation webroot
incoming-category {botnets
| denial-of-service |
exploits | phishing | proxy
| reputation | scanners |
spam-sources | tor-proxy |
web-attacks}
Select the categories of packets coming from the Internet that the Zyxel
Device applies IP reputation filtering to.
[no] ip-reputation webroot
outgoing-category {botnets
| phishing}
Select the categories of packets coming from the Internet or local
networks that the Zyxel Device applies IP reputation filtering to.
Note: In Firmware v4.55 or later, the phishing option does nothing
and is only included for compatibility.
show ip-reputation webroot
{incoming-category |
outgoing-category}
Displays whether each category of packet coming from the Internet or
Internet and local networks is filtered.
Table 176 IP Reputation Commands (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
