Chapter 58 Certificates
ZyWALL Series CLI Reference Guide
498
ocsp url url [id name password password]
[deactivate]
Sets the validation configuration for the
specified remote (trusted) certificate where
the directory server uses OCSP.
url: Type the protocol, IP address and
pathname of the OCSP server.
name: The Zyxel Device may need to
authenticate itself in order to access the OCSP
server. Type the login name (up to 31
characters) from the entity maintaining the
server (usually a certification authority). You
can use alphanumeric characters, the
underscore and the dash.
password: Type the password (up to 31
characters) from the entity maintaining the
OCSP server (usually a certification authority).
You can use the following characters: a-zA-Z0-
9;|`~!@#$%^&*()_+\{}':,./<>=-
no ca category {local|remote} certificate_name
Deletes the specified local (my certificates) or
remote (trusted certificates) certificate.
no ca validation name
Removes the validation configuration for the
specified remote (trusted) certificate.
show ca category {local|remote}
Displays a summary of all local (my
certificates) or remote (trusted certificates)
certificates in readable text.
show ca category {local|remote} name
certificate_name format {text|pem}]
Displays information about the local or remote
certificate with the specified name.
Under format, use text to display the
certificate’s information in readable text, or
pem to display the certificate in PEM (Base-64)
encoded format.
show ca category {local|remote} name
certificate_name certpath
Displays the certificate path of the specified
the local or remote certificate.
show ca hierarchy name certificate_name [format
all | cn | file]
Displays the hierarchy of certification
authorities that validate the certificate, and
the certificate itself.
Format dertmines..
show ca validation name name
Displays the validation configuration for the
specified remote (trusted) certificate.
show ca spaceusage
Displays the storage space in use by
certificates.
Table 283 ca Commands Summary (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
