ZyXEL Communications ZyWALL 310 - Page 245

Chapter 30 Cloud CNM
ZyWALL Series CLI Reference Guide
245
[no] cnm-agent manager
{https_url|http_url}
Sets the URL (HTTP or HTTPs) for theCloud CNM SecuManager server. The
string must be less than 255 characters. Enter the IPv4 IP address of the
Cloud CNM SecuManager server followed by the port number (default
7547 for HTTPS or 7549 for HTPP) followed by the CNM ID from the license
in CNM URL. For example, if you installed Cloud CNM SecuManager on
a server with IP address 1.1.1.1 and CNM ID V6ABQNTPYGD, then type
1.1.1.1:7547/V6ABQNTPYG or 1.1.1.1:7549/V6ABQNTPYG as the
CNM URL.
The
no command removes the URL (HTTP or HTTPs) for the Cloud CNM
SecuManager server.
[no] cnm-agent periodic-
inform activate
Enables the Zyxel Device to send Inform messages to the Cloud CNM
SecuManager server informing of its presence at regular intervals.
The
no command disables the Zyxel Device from sending Inform
messages to the Cloud CNM SecuManager server.
[no] cnm-agent periodic-
inform interval
<10…86400>
Sets how often the Zyxel Device should inform the Cloud CNM
SecuManager server of its presence. The valid range for the interval is
from 10 to 86400 seconds.
The
no command removes the interval.
[no] cnm-agent acs
username tr069_acs_username
Sets the Cloud CNM SecuManager connection request user name. The
user name can be from 0 to 254 characters long using these
characters: [a-zA-Z0-9-][\.a-zA-Z0-9_-].
The
no command removes the TR069 account user name.
[no] cnm-agent acs
password tr069_acs_password
Sets the Cloud CNM SecuManager connection request password
associated with the user name. The password can be from 0 to 254
characters long using these characters: [a-zA-Z0-9-][\.a-zA-Z0-9_-].
The
no command removes the password.
[no] cnm-agent password
Sets the password to authenticate the Zyxel Device.
The no command removes the password.
[no] cnm-agent vantage
certificate
tr069_cert_file_name
Sets the Cloud CNM SecuManager server's certificate in HTTPS
authentication as TR-069 needs to verify this. The certificate name can
be from 1 to 127 characters long using these characters: [a-zA-Z0-9_\.-
].
The no command disables using the server’s certificate in HTTPS
authentication.
[no] cnm-agent
authentication enable
Sets authentication of the Cloud CNM SecuManager server's
certificate.
The no command disables authentication.
cnm-agent server-type
[vantage | tr069]
Sets the management server to be Vantage or Cloud CNM
SecuManager. At the time of writing, Vantage is no longer supported.
[no] cnm-agent auto-get-
acs activate
Allows the Zyxel Device to get the Cloud CNM SecuManager URL from
myZyxel.
The no command disallows the Zyxel Device from getting the Cloud
CNM SecuManager URL from myZyxel.
[no] cnm-agent trigger-
inform <0..8640>
Specifies the time interval for the Zyxel Device to send Inform messages.
The valid range for the interval is in 10-second multiples where 0 means
0 to 10 seconds, 1 means 10 to 20 seconds, and so on.
The
no command removes the interval.
Table 124 Command Summary: Cloud CNM SecuManager (continued)
COMMAND DESCRIPTION