Chapter 32 Hotspot
ZyWALL Series CLI Reference Guide
262
[no] billing discount activate
Activates the discount price plan.
The no command disables the discount price plan.
billing discount button {a | b |
c} [charge-by-level]
Specifies a button to assign the base charge.
charge-by-level: to charge the rate at each successive level from the first
level (most expensive per unit) to the highest level (least expensive per unit)
that the total purchase reaches.
[no] billing discount unit <2..10>
price price
Creates a new discount level by setting the duration of the billing period that
should be reached before the Zyxel Device charges users at this level and
defining this level’s charge per time unit.
The no command removes this discount level.
[no] billing profile profile_name
Creates a billing profile and enters the billing profile sub-command
mode to set the price and the duration of the billing period. See Table 135 on
page 263 for the sub-commands.
The no command removes the specified profile.
profile_name: use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and
underscores (_). Spaces are not allowed. The first character must be a letter.
billing profile rename
profile_name profile_name
Renames the specified billing profile (first profile_name) to the specified
name (second profile_name).
billing tax-rate <0..100>
Sets the tax rate. For example, type 6 for a 6% sales tax.
[no] billing tax-rate activate
Sets the Zyxel Device to charge sales tax for the account.
The no command sets the Zyxel Device to not charge sales tax for the account.
billing unused-expire {minute
<30..60> | hour <1..24> | day
<1..365>}
Specifies a time unit and number to set how long to wait before the Zyxel
Device deletes an account that has not been used.
billing username-password-length
<4..6>
Sets how many characters the username and password of a newly-created
dynamic guest account will have.
[no] billing wlan-ssid-profile
profile_name
Sets the name of the SSID profile to which you can apply the general billing
settings.
The no command sets the Zyxel Device to not apply the billing settings to the
SSID profile.
[no] billing replenish activate
Allows dynamic-guest accounts to purchase additional time units for their
accounts before their accounts expire.
show billing discount default rule
Displays settings of the default discount price plan.
show billing discount rule
Displays settings of the custom discount price plan(s).
show billing discount status
Displays billing discount settings.
show billing profile
[profile_name]
Displays settings for all or the specified billing profile.
show billing status
Displays the general billing settings, such as the accounting method or tax rate.
Table 134 billing Commands (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
