Chapter 41 Sandboxing
ZyWALL Series CLI Reference Guide
347
[no] sandbox queue-packet
Has the Zyxel Device hold the downloaded file for up to two seconds if the
downloaded file has never been inspected before. The Zyxel Device will wait
for the could server’s result and forward the file in two seconds. Sandbox
detection may take longer than two seconds, so infected files could still
possibly be forwarded to the user.
The no command clears the setting.
Note: The Zyxel Device only checks the file types you specified for
sandbox inspction. The scan result will be removed from the
Zyxel Device cache after the Zyxel Device restarts.
sandbox response-clean-log {log |
log-alert | no}
Generates a log, log and alert or neither (no) when no malicious or suspicious
files are detected.
sandbox server-file {delete |
keep}
The Zyxel Device tells the sandboxing host server to keep or delete a file after
scanning it.
Note: This feature is deprecated.
[no] sandbox statistics collect
Turns the collection of sandboxing statistics on or off.
sandbox statistics flush
Clears the collected sandboxing statistics.
sandbox dashboard statistics flush
Clears the collected sandboxing statistics on the web GUI dashboard.
[no] security-service sandbox
activate
Turns on sandboxing on the Zyxel Device.
The no command disables sandboxing.
show sandbox file-type all
Displays all the file types and whether a type of files is to be sent for sandboxing
inspection.
show sandbox file-type status
Displays only the types of files that are set to be sent for sandboxing inspection.
show sandbox statistics collect
Displays whether the collection of sandboxing statistics is turned on or off.
show sandbox statistics ranking
file-name
Queries and sorts the sandboxing statistics entries by file name.
show sandbox statistics summary
Displays the collected sandboxing statistics.
show sandbox statistics dashboard
summary
Displays the collected sandboxing statistics that are currently displayed on the
web GUI dashboard.
show sandbox status
Displays the action and log settings for sandboxing.
show security-service status
Displays whether the security services are enabled on the Zyxel Device.
Table 190 Sandbox Commands (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
