Chapter 44 Anti-Spam
ZyWALL Series CLI Reference Guide
404
44.2.1.1 Anti-Spam Profile Example
This example shows how to configure (and display) a WAN to DMZ anti-spam profile to scan POP3 and
SMTP traffic. SMTP spam is forwarded. POP3 spam is marked with a spam tag. The Zyxel Device logs the
show anti-spam xheader {mail-
content | mail-phishing | virus-
outbreak}
Firmware 4.55 or earlier
Displays the name and value for the X-Header to add to
content-analysis identified spam, e-mails containing suspicious
websites links or e-mails containing a virus.
show anti-spam xheader mail-
phishing
Firmware 4.60 or later
Displays the name and value for the X-Header to add to
content-analysis identified e-mails containing suspicious
websites links.
show anti-spam xheader query-
timeout
Displays the name and value for the X-Header the Zyxel Device
adds to e-mails that it tags and forwards when queries to the
mail scan servers time out.
[no] security-service anti-spam
activate
Turns on anti-spam/email security on the Zyxel Device.
The no command disables anti-spam/email security.
security-service anti-spam inspect
{all-traffic | by-policy}
Sets how the security service inspects traffic.
all-traffic: The security service inspects all traffic passing
through the Zyxel Device.
by-policy: The security service inspects traffic only when its
profile is bound to a security policy.
For information on binding a security service profile to a security
policy, see Section 29.2.1 on page 226.
show security-service status
Displays whether the security services are enabled on the Zyxel
Device.
Table 215 Commands for Anti-Spam Profile Rules (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
