Chapter 45 Collaborative Detection & Response
ZyWALL Series CLI Reference Guide
419
3 Follow the parameters given above to configure the email address to receive an alert email when the
CDR containment action is triggered.
4 Follow the parameters given above to configure the block message that will show in the default Zyxel
Device notification page.
5 Save the current configuration to the Zyxel Device.
Router(config)# cdr send-alerts-to abcd@gmail.com
Router(config)# cdr block message Your device is trying to access
malicious websites, so you are temporarily blocked. Please contact the
network admin.
Router(config)# write
To Next Page
Loading...
