EasyManua.ls Logo

ZyXEL Communications ZyWALL 310 - Page 429

ZyXEL Communications ZyWALL 310
665 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 47 IP Exception
ZyWALL Series CLI Reference Guide
429
Table 237 Commands for IP Exception
COMMAND DESCRIPTION
security-service ip-
exception {profile_name}
Configure an IPv4 rule.
If the
rule does not currently exist, then the Zyxel Device creates it.
source {address_name |
any} destination
{address_name | any}
{log | no-log}
address_name: Apply this rule to IPv4 packets with the specified source or
destination address.
any: Apply this
rule to IPv4 packets with any source or destination address.
log: Create a log message each time an incoming IPv4 packet matches
this
rule.
no-log: Do not create any log messages.
[no] {anti-virus| ip-
reputation | ips | threat-
website} bypass
Sets the service that IPv4 packets will bypass. To bypass multiple services, run
the command multiple times.
ips is IDP.
Use the no command to stop bypassing a service.
[no]
description
{DESCRIPTION}
{DESCRIPTION}: Sets a description for the IP Exception rule. You can use up
to 60 printable ASCII characters.
Use the no command to delete the description for this profile.
security-service ip6-
exception {profile_name}
Configure an IPv6 rule.
If the
rule does not currently exist, then the Zyxel Device creates it.
source {address_name |
any} destination
{address_name | any}
{log | no-log}
address_name: Apply this rule to IPv6 packets with the specified source or
destination address.
any: Apply this
rule to IPv6 packets with any source or destination address.
log: Create a log a log message each time an incoming IPv6 packet
matches this
rule.
no-log: Do not create any log messages.
[no] {anti-virus | ip-
reputation | ips | threat-
website} bypass
Sets a service that IPv6 packets will bypass. You can run this command
multiple times to bypass multiple services.
ips is IDP.
Use the no command to stop bypassing a service.
[no]
description
{DESCRIPTION}
{DESCRIPTION}: Sets a description for the IP Exception rule. You can use up
to 60 printable ASCII characters.
Use the no command to delete the description for this profile.
no security-service ip-
exception profile_name
Removes the specified IPv4 rule.
no security-service ip6-
exception profile_name
Removes the specified IPv6 rule.
show security-service ip-
exception
Displays all IPv4 rules.
show security-service
ip6-exception
Displays all IPv6 rules.

Table of Contents

Other manuals for ZyXEL Communications ZyWALL 310

Related product manuals