EasyManua.ls Logo

ZyXEL Communications ZyWALL 310 - Page 450

ZyXEL Communications ZyWALL 310
665 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 50 User/Group
ZyWALL Series CLI Reference Guide
450
50.2.3.1 User Setting Command Examples
The following commands show the current settings for the number of simultaneous logins.
50.2.3.2 Create User Accounts Command Examples
Lease time is the idle timeout for a specific user. A logged in user must use the web configurator or CLI
before he is logged out.
Reauthentication time is the number of minutes the user can be logged into the Zyxel Device in one
session before the user has to log in again.
For example, suppose you’ve set the lease time to 30 minutes and the reauthentication time to 60
minutes. See the comparison table below for more information on the differences between lease time
and reauthentication time.
You want to log the admin account Max out if 60 minutes of idle time have passed, that is, he has not
been using the Zyxel Device web configurator or CLI.
You want to make the number of minutes unlimited so the admin account Max will not have to log in
again after a certain time period.
1 Create an admin account using the parameters given above.
Router# configure terminal
Router(config)# show users simultaneous-logon-settings
enable simultaneous logon limitation for administration account: yes
maximum simultaneous logon per administration account : 1
enable simultaneous logon limitation for access account : yes
maximum simultaneous logon per access account : 3
Table 252 Lease Time and Reauthentication Time Comparison Table
USER ACTION RESULT
Lease Time The user has used the Zyxel
Device web configurator or CLI
within 30 minutes.
The user will not be logged out.
The user has not used the Zyxel
Device web configurator or CLI
for over 30 minutes.
The user will be logged out.
Reauthentication Time The user has used the Zyxel
Device web configurator or CLI
within 60 minutes.
After 60 minutes, the user will
be logged out. He must log in
again.
The user has not used the Zyxel
Device web configurator or CLI
for over 60 minutes.
Table 253 Create User Account Example
USER NAME PASSWORD USER TYPE
Max 1234 admin

Table of Contents

Other manuals for ZyXEL Communications ZyWALL 310

Related product manuals